Dongguan Botai Electronics Co., Ltd.
Tel: 0769-8263 6114
Fax: 0769-8263 6114
Contact : Mr. Zhuang
Tel : 18681169907
E-mail : : firstname.lastname@example.org
Address: 2 floor, north of yellow river, No. 3 Xiangye street, Liaobu Town, Dongguan City.
Mr. Zhuang: 15850304699
Mr. Xiong: 13616288556
Address: room 1301, block A, New World Plaza, Jianwei, Kunshan, Jiangsu.
As we all know, the after-sales service of the equipment profession is very important in the transaction. When the automatic soldering machine is sent to the buyer, it is generally required to have special after-sales equipment debugging, and the operators are trained to operate effectively for a long time. Therefore, the selection of soldering machine manufacturers with strong technical strength is more concerned by customers. So what do the general soldering machine manufacturers adjust?
Soldering machine manufacturers debugging process:
1. Input: When correcting, write the data item in the correction to the memory time: time and output flashover.
2. Return to zero: the output counter is eradicated to zero.
3. Auto: Automatic cycle selection button, when the light is on, it is automatic cycle operation.
4. Manual: Enter or exit the manual debugging interface.
5. Jumping: Forced to adjust to the next section of the soldering rod; when correcting, experience the soldering rod or rotating direction to travel.
6. Retreat: Force jump back to the previous section of the soldering rod; when correcting, experience the solder rod or the rotating position.
Automated soldering machine features:
1. Select single-chip microprocessor planning, which has stronger function, smaller volume and strong anti-interference ability.
2. The operation and operation mode can be changed for different models and applications, and the application plan is more extensive.
3, the soldering shaft supply 99 segment positioning speed selection. Supply single-step work, all processing, cycle automatic processing a variety of processing methods.
4, the memory uses FLASH ROM, large capacity, can store 1000 steps of solder information, each step can be set to separate 9 kinds of solder information, 5 kinds of utility options, solder data will not be lost after blocking the power supply.
5, the soldering axis orientation can be set by experience or button, the data flashing window can flash the current orientation of the soldering shaft.
6. A set of correction code settings to prevent the setting data from being changed arbitrarily.
7, the welding axis displacement unit setting plan is wide, using all kinds of standard screws.
8, strong compatibility, can directly replace the same type of controller. Unique file connection function. It can complete the messy multi-layer irregular array and non-array graphic interlacing processing.
Now, the soldering machine manufacturers are mainly gathered in the Pearl River Delta region. The adjustments of each factory will have different operations and habits, but they are all very different. We only need to grasp the theory of automatic soldering machine work, if there is no Have not found the cause of the problem, please contact the manufacturer to help deal with it, try to deal with the problem as quickly as possible and the correct treatment method to prevent the impact of production.